Colour
Textured Powder Coat / Anodised
Next-Gen Storage for Legacy RED Cameras
NEXA-MAG is fully compatible with RED DSMC1 and DSMC2 cameras . Designed specifically for professional filmmakers, it delivers the highest performance and reliabity possible for shooting in up to 8K RAW.
NEXA-MAG ensures uninterrupted recording, rapid offloads, and maximum workflow efficiency.
570MB/s
Accelerated read speeds
MLC NAND
Premium Toshiba Memory
1500 / 3000 TBW
Longer lifespan & reliability
*Sequential read performance was measured using Crystal Disk Mark via a SATA 6Gbps interface..
Why use NEXA-MAG?
FULL POWER.
Older 960GB mini-mags used double the Toshiba components but only accessed half a channel of bandwidth. With NEXA-MAG, we’ve upgraded to a newer generation of Toshiba chips, cutting component count in half while unlocking the full bandwidth channel. The result is 25% faster read speeds, increased reliability with fewer connections, and a lifespan of up to 3000 Terabytes Written (TBW).
HANDLE WITH CONFIDENCE.
Recognising how filmmakers actually handle their media, we have redesigned the enclosure with precision recesses, making it easier and more secure to insert and remove NEXA-MAG drives - eliminating the awkward grip issues of the original MiniMags.
OFFLOAD FAST.
NEXA-MAG achieves offload speeds of up to 570MB/s, a 25% increase over original Mini-Mags. While constrained by SATA III limitations, this is the maximum performance possible for this format - reducing transfer times and maximising shooting efficiency.
LOCKED. IN.
NEXA-MAG is designed for enhanced usability, featuring precision recesses in the enclosure for a more secure grip, making insertion and removal effortless. Additionally, the drive’s width has been increased slightly, ensuring a tighter, more stable fit.
MORE LIFE.
Built around ultra-cool running Toshiba components, NEXA-MAG utilises the latest compatible generation of SSD technology. Our drives are rated up to 3000 Terabytes Written (TBW)—over four times the lifespan of a standard Samsung 1TB SSD (720 TBW).
COOLER THAN EVER.
NEXA-MAG is engineered for optimal heat dissipation, featuring a 25% increased enclosure surface area with integrated cooling fins. Additionally, high-conductivity thermal pads conform around internal components, ensuring efficient heat transfer and sustained high performance.
.svg){kind=tracking}
Watch a overview
of NEXA-MAG
Watch the film
Which MAG is right for you?
Our original goal was to match RED® specifications, but after months of research, we realised there was immense potential to refine and enhance these drives.
_480GB_lowerRes.avif)
NEXA-MAG 480 GB
Same performance, lower Cost
$385
$545
1500 TBW
Maximum Data Rate &
Highest R3D Quality
Highest R3D Quality
2 Year Warranty &
Technical Support
Technical Support
Embedded DRAM Cache
Premium Toshiba - MLC NAND
_960GB_lowerRes.avif)
NEXA-MAG 960 GB
More room, more flexibility
$560
$795
3000 TBW
Maximum Data Rate &
Highest R3D Quality
Highest R3D Quality
2 Year Warranty &
Technical Support
Technical Support
Embedded DRAM Cache
Premium Toshiba - MLC NAND
Limited Time Offer
We’re offering this exclusive 30% discount as a way to give back to our early supporters
& help more filmmakers and creators experience the power and reliability of NEXA-MAG.
With only 100 units available, get yours now at this exclusive price.
offer ends 15th May or when stocks run out
Body & Mount Caps
For RED DSMC1, DSMC2 & Ranger
Designed as a upgrade over the Plastic DSMC Lens Mount Cover and also DSMC Front Body Caps offered by RED.
These are CNC machined from lightweight aluminium with a ruggedised powder-coated finish, to match the finish of RED Digital Cinema Cameras.
*Also Includes a M4 Thumb Screw Upgrade Kit
Material
Aluminium
Finish
Matte Black
Accepted payment methods
Free Global Shipping
Over £150.00 GBP
Financing Available
Via PayPal Credit
30 Days Guarantee
No Questions Asked
Sustainable Products
150% Carbon Offset
Product Description
Designed as an upgrade over the plastic DSMC Lens Mount Cover and Front Body Cap offered by RED,.
These caps are CNC-machined from lightweight aluminium with a rugged powder-coated finish to match the fit and feel of RED DSMC1, DSMC2, and Ranger cameras.
Thumb Screw upgrade Kit
This kit includes 8 quick-release thumb screws, tailor-made for maximum strength and usability.
Crafted from SS17-4 PH stainless steel, these screws were selected for their exceptional strength and machinability in a small form factor.
Compared to the standard mount screws provided with RED DSMC1 and DSMC2 lens mounts, these thumb screws are significantly stronger.
They are designed with knurled grips for easy, secure lens swaps, allowing you to tighten them comfortably by hand. For added versatility, the thumb screws also feature T20 Torx inputs identical to the standard RED mount screws, enabling the use of a T20 Torx bit for the tightest possible fit.
Captive functionality
The thumb screws are optimised for use with captive RED DSMC lens mounts.
Captive mounts feature screws that are held securely within the mount itself. Most RED mounts are the captive type, though some early versions were not.
Optimised Design
These lens mount covers include a raised section designed to match the profile of the foam light gasket found in DSMC2 cameras.
What's included?
The kit comes with all components below:
- 1 x Aluminium RED DSMC Body Cap
- 1 x Aluminium Rear Lens Cap
- 8 x Stainless Steel - M4 Thumb Screws w/countersunk T20 Torx
Compatibility
DSMC1
- RED EPIC-X
- RED EPIC-M
- RED SCARLET-X
- RED SCARLET-MX
DSMC2
- RED SCARLET-W
- RED EPIC-W
- RED WEAPON DRAGON
- RED WEAPON HELIUM
- RED WEAPON MONSTRO
- RED WEAPON GEMINI
- RED DSMC2 DRAGON
- RED DSMC2 HELIUM
- RED DSMC2 MONSTRO
- RED DSMC2 GEMINI
- RED RANGER HELIUM
- RED RANGER MONSTRO
- RED RANGER GEMINI
Why CINELUX is the best place to buy NEXA-MAG.
Free Global Shipping
Over £150
Financing
Available via PaypalCredit
30 Days Returns
No questions asked
Sustainable Products
150% Carbon Offset
Take A Closer Look.
RED® vs NEXA-MAG
Pick the REDMAG or MINI-MAG you currently have and see the key differences.
MINI-MAG® 960GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Data Rate & Highest R3D Quality
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
No Longer Available
Embedded DRAM Cache
Standard Toshiba - MLC NAND
Not Publicly Available
MINI-MAG® 1TB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Data Rate & Highest R3D Quality
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
No Longer Available
Embedded DRAM Cache
Consumer - TLC
Not Publicly Available
MINI-MAG® 512GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Datarate & Compression Options
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
No Longer Available
Embedded DRAM Cache
Standard - MLC
Not Publicly Available
MINI-MAG® 480GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Data Rate & Highest R3D Quality
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
1 Year Warranty & Technical Support
Embedded DRAM Cache
Standard Toshiba - MLC NAND
Not Publicly Available
MINI-MAG® 120GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Limited Data Rate & R3D Quality
- R3D max data rate - 225MB/s*¹
- R3D compression - 8K 60FPS - 16:1
No Longer Available
Embedded DRAM Cache
Standard - MLC
Not Publicly Available
MINI-MAG® 240GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Limited Data Rate & R3D Quality
- R3D max data rate - 225MB/s*¹
- R3D compression - 8K 60FPS - 16:1
No Longer Available
Embedded DRAM Cache
Standard - MLC
Not Publicly Available
MINI-MAG® 120GB SSD
Full Compatibility with DSMC 1® & DSMC 2®
Limited Data Rate & R3D Quality
- R3D max data rate - 225MB/s*¹
- R3D compression - 8K 60FPS - 16:1
No Longer Available
Embedded DRAM Cache
Standard MLC
Not Publicly Available
NEXA-MAG 480GB / 960GB
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Data Rate & Highest R3D Quality
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
2 Year Warranty & Technical Support
Embedded DRAM Cache
Premium Toshiba - MLC NAND
1500 TBW (480GB) / 3000 TBW (960GB)
NEXA-MAG 480GB / 960GB
Full Compatibility with DSMC 1® & DSMC 2®
Maximum Data Rate & Highest R3D Quality
- R3D max data rate - 300MB/s*¹
- R3D compression - 8K 60FPS - 12:1
2 Year Warranty & Technical Support
Embedded DRAM Cache
Premium Toshiba - MLC NAND
1500 TBW (480GB) / 3000 TBW (960GB)
Improved Thermals
No items found.
No items found.
No items found.
The graph shows the maximum temperature recorded while the camera is recording at the highest data rate possible on DSMC2, from 0% to 100% full. (Measurements taken from a thermal probe)
No items found.
No items found.
No items found.
Our FAQs
This section is for FAQs specifically to do with this product.
For our full FAQs, please click on the help dropdown in the menu
What is special about your SSDs and why can’t you use standard SSDs?
There are several reasons why standard SSDs cannot be used. To simplify, it comes down to both software and hardware incompatibilities. It's impossible to find an off-the-shelf product that works reliably for this setup process, as the hardware is fundamentally incorrect for the task.
Even if you manage to bypass the initial setup issues, the recordings will not be trustworthy as there are over 15-20 specific parameters that must align perfectly between the software and hardware for proper functionality.
How does KipperTie use a consumer-grade M.2 Samsung drive?
KipperTie uses a SATA-based M.2 Samsung drive that can communicate using technology compatible with RED cameras. While these drives are cost-effective to purchase, getting them to work reliably with RED systems is extremely challenging without direct cooperation from Samsung, as there are over 15-20 specific parameters that have to be setup correctly
Consumer-grade drives, while cost-effective, are less suitable for a few key reasons:
Heat Generation: These drives produce excessive heat, risking thermal throttling, camera cooling strain, and potential long-term damage to sensitive components during extended recording sessions.
NAND Quality: Consumer drives typically use TLC NAND, designed for casual use, lacking the endurance needed for continuous RAW data recording and frequent read/write cycles.
Lifespan: For example, KipperTie's Samsung-based 2TB MINI-MAG® uses TLC NAND rated for 1,200 TBW (600 full drive cycles), while our 960GB SSD with Toshiba MLC NAND is rated for 3,000 TBW (3,000 full drive cycles), offering 5 x the reliability and longevity.
What are the delivery timeframes?
Drives will be shipped in Mid-May.
Do NEXA-MAGs work in a standard RED mag reader?
Yes, they are fully compatible with standard RED mag readers.
How do I know if NEXA-MAG is compatible with my RED camera model?
Any RED®️ DSMC1®️, DSMC2®️ and RED ONE®️ camera is compatible with our NEXA-MAG SSDs.
Are there any firmware updates required to use NEXA-MAG?
Yes, for DSMC1®️ and DSMC2®️, you must be running firmware version 6.3.75 or later. For RED ONE®️, you must have the latest firmware installed, version 32.0.3.
Can NEXA-MAG be used interchangeably with RED MINI-MAGs on the same project?
Yes, they act and handle exactly like the original media.